| Real Time Service
Assurance CVOSS
What sets Net2Phone’s Cable Telephony Solution
apart is CVOSS (Cable Voice Operation
Support System) -- Net2Phone’s real time network
and service management suite. CVOSS is a fully automated,
end-to-end management suite that incorporates monitoring,
diagnosis, and troubleshooting elements across the local cable
HFC network, Net2Phone’s global IP network, and the
PSTN. The sophisticated CVOSS monitoring system enables Net2Phone
to proactively monitor real-time views of each network segment
to identify, diagnose, and resolve the root cause of problems
before callers become aware of them. CVOSS bridges the gap
between access network monitoring tools, packet metrics, and
traditional telephony metrics providing both Net2Phone and
the operator with a call-level view of the VoIP service.
The operator administers and controls the functionality of
the management suite via the CVOSS Portal and the CVOSS Dashboard.
The operator has access to the CVOSS Portal and Dashboard
to also view the network and operations. More
about CVOSS
24 x 7 Network Operations Center
Net2Phone currently operates a Network Operations
Center (NOC) that has a combined expertise in both Voice and
Data. The center provides a 24 x 7 support system to Net2Phone’s
worldwide operations, which route millions of minutes daily.
Network management tools are used to monitor and manage call
quality and view all gateway traffic on a real time basis.
In addition to network monitoring and management, the NOC
isolates and troubleshoots individual network components that
comprise the solution.
Quality of Service Metrics
The solution’s Quality of Service metrics guarantee
operators that voice quality and service availability meet
or exceed customer expectations. CVOSS collects, stores, and
analyzes close to 300 independent metrics of the total solution.
Up-to-the-minute, as well as historical data, can be viewed
concurrently. A threshold engine generates alarms based on
expected operations patterns which will alert the NOC to take
appropriate action. The table below outlines the standard
QoS metrics captured and assessed by the Net2Phone solution
in order to meet the operator’s high levels of voice
quality and service availability.
Dial Tone Delay
Post Dial Delay
MOS Score (via PESQ)
Routing Termination |
Usage (total calls, total
minutes)
Call Success Ratio
Answer Seizure Ratio (ASR)
Average Length of Call (ALOC)
Categorization of failed calls (16 categories)
Simultaneous Calls |
Upstream Signal Quality
Upstream and Downstream Power Levels
Packet Loss
CMTS Interface Statistics (bps)
CMTS Uncorrectables |
Distribution by Billing
Plan
Distribution by Location
Distribution by Status |
Destination Distribution
(local, regional, long distance, international)
Distribution by Time of Day
Distribution by Day of Week
Unsuccessful Calls |
|
Voice Quality
Net2Phone incorporates ITU Standard P.862 -- the
Perceptual Evaluation of Speech Quality algorithm (PESQ) --
to measure voice quality in its network management suite of
tools. The output of the PESQ algorithm is the MOS (Mean Opinion
Score) rating that would be provided by a human. It is the
most current and reliable predictor of voice quality for packet-based
voice solutions.
| 1 |
Bad |
| 2 |
Poor |
| 3 |
Fair |
| 4 |
Good |
| 5 |
Excellent |
|
Continue >> Telecommunications Administration
Back >> Call Management
Server Platform
|
 |
|
|
 |
Net2Phone offers two telephony solutions for cable operators:
|
|
|

| Why
Deploy Cable Telephony? |
|
 |
| |
|

|
|
 |
| To learn more about CVOSS,
Net2Phone’s real time network and service
management suite, click
here. |
|
|

|
|
 |
| To receive additional
information about Net2Phone Cable Telephony, click
here. |
|
|
|

|